Maintenance Supplies Solutions Page FA-2-41 Fasteners

1-800-458-4018 www.appliedmss.com 41 FA 2 Flatwashers (USS & SAE) Use with Grade 5 Cap Screws and machine screws Precision stamped from prime SAE approved carbon steel Consistent uniform thickness USS SIZES For use in normal applications. The thicker wall provides maximum bearing surface for a more even distribution of the load and greater resistance to pull through. Use with Grade 5 Cap Screws and machine screws Zinc plated to resist rust and corrosion Smooth, burr-free surfaces Provides a larger bearing surface to distribute load evenly SAE SIZES For application where space is limited or appearance is a factor. The thinner wall provides adequate bearing surface closer inside diameter tolerance than USS washers on sizes through 5/8". USS BOLT PART # SIZE I.D. O.D. THICKNESS QTY. 110875 3/16(#10) 1/4 9/16 3/64 500 110875-100 3/16(#10) 1/4 9/16 3/64 100 05116 1/4 5/16 3/4 1/16 200 05116-100 1/4 5/16 3/4 1/16 100 05117 5/16 3/8 7/8 5/64 200 05117-100 5/16 3/8 7/8 5/64 100 05118 3/8 7/16 1 5/64 150 05119 7/16 1/2 1-1/4 5/64 75 05120 1/2 9/16 1-3/8 7/64 75 05121 9/16 5/8 1-1/2 7/64 50 05121-25 9/16 5/8 1-1/2 7/64 25 05122 5/8 11/16 1-3/4 9/64 50 05122-25 5/8 11/16 1-3/4 9/64 25 05123 3/4 13/16 2 5/32 25 05123-20 3/4 13/16 2 5/32 20 05124 7/8 15/16 2-1/4 11/64 20 05124-10 7/8 15/16 2-1/4 11/64 10 05125 1 1-1/16 2-1/2 11/64 20 05125-5 1 1-1/16 2-1/2 11/64 5 05600 1-1/8 1-1/4 2-3/4 11/64 5 05600-10 1-1/8 1-1/4 2-3/4 11/64 10 05601 1-1/4 1-3/8 3 11/64 5 05602 1-1/2 1-5/8 3-1/2 3/16 5 Standard Washers SAE BOLT PART # SIZE I.D. O.D. THICKNESS QTY. 07400 #4 1/8 5/16 1/32 250 07401 #6 5/32 3/8 3/64 250 07402 #8 3/16 7/16 3/64 250 07403 #10(3/16) 7/32 1/2 3/64 200 07403-100 #10(3/16) 7/32 1/2 3/64 100 07404 #12 1/4 9/16 1/16 200 05126 1/4 9/32 5/8 1/16 200 05126-100 1/4 9/32 5/8 1/16 100 05127 5/16 11/32 11/16 1/16 200 05127-100 5/16 11/32 11/16 1/16 100 05128 3/8 13/32 13/16 1/16 150 05128-100 3/8 13/32 13/16 1/16 100 05129 7/16 15/32 59/64 1/16 75 05129-100 7/16 15/32 59/64 1/16 100 05130 1/2 17/32 1-1/16 3/32 75 05131 9/16 19/32 13/16 3/32 50 05131-75 9/16 19/32 13/16 3/32 75 05132 5/8 21/32 1-5/16 3/32 50 05133 3/4 13/16 1-1/2 9/64 25 05133-50 3/4 13/16 1-1/2 9/64 50 05134 7/8 15/16 1-3/4 9/64 20 05134-25 7/8 15/16 1-3/4 9/64 25 05135 1 1-1/16 2 9/64 20 05135-25 1 1-1/16 2 9/64 25 05603 1-1/8 1-3/16 2-1/4 9/64 5 05604 1-1/4 1-5/16 2-1/2 5/32 5 05605 1-1/2 1-9/16 3 5/32 5

Previous Page
Next Page