Maintenance Supplies Solutions Page FA-2-84 Fasteners

84 1-800-458-4018 www.appliedmss.com FA 2 Socket Hex Tools Hex Key Tips PROTECT YOURSELF: Wear safety goggles at all times. Maintain a firm stance in relation to the work. Apply proper leverage with a uniform pulling action-do not push. Wear gloves when possible. SELECT THE RIGHT TOOL: Hand Tools are designed for particular applications. Always use the proper tool size and type for the job. Avoid tool substitution and don't exceed rated strength limits. PROTECT YOUR TOOLS: Secure your Hand Tools in their cases, stands or boxes. Proper storage of these tools will keep them protected and accessible. A light, protective oil coating will prevent corrosion. INSPECT YOUR TOOLS: Check tools regularly for wear. Replace keys with new keys when corners or ends become worn or rounded. Keys with a permanent twist should be discarded. REMEMBER... Fully insert key into fastener socket to assure full engagement. Keep fastener sockets clean. Refer to product specifications for correct tightening torque. WARNING: The use of a pipe extension on a Hex Wrench or Hand Tool is hazardous to user safety. Hexagon Keys Hex Key Fit Selector-Keys fit these products NOMINAL SOCKET HEAD FLAT HEAD BUTTON HEAD LOWHEAD NOMINAL KEY SIZE, CAP SCREWS SOCKET CAP SOCKET CAP SET SHOULDER PRESSURE ALLE- SOCKET CAP KEY SIZE INCHES 1960 SERIES 1936 SERIES SCREWS SCREWS SCREWS SCREWS PLUGS NUTS SCREWS INCHES .028 - 0 - .028 .035 - 0 1,2 - .035 .050 0 0,1 1,2 3,4 - 4 .050 1/16 1 2 3,4 5,6 - 5,6 1/16 5/64 2,3 3,4 5,6 8 - 8 5/64 3/32 4,5 5,6 8 10 - 10 3/32 7/64 6 - 7/64 1/8 - 8 10 1/4 4,5 1/4 1/8 - 9/64 8 10 - 9/64 5/32 10 1/4 5/16 1/16 6 5/16 5/32 3/16 1/4 - 5/16 3/8 1/8 8,10 3/8 3/16 7/32 - 5/16 3/8 7/16 - 7/16 7/32 1/4 5/16 - 7/16 - 1/2 1/4 1/2 1/4 5/16 3/8 3/8, 7/16 1/2 5/8 3/8 5/16 5/8 5/16 3/8 7/16, 1/2 1/2 5/8 - 3/4 1/2 3/8 - 3/8 7/16 - 7/16 - 7/16 1/2 5/8 3/4 - 7/8 1 - 1/2 - 1/2 9/16 - 3/4, 7/8 7/8 - 1, 1-1/8 - 3/4 - 9/16 5/8 3/4 1 - 1-1/4,1-3/8 1-1/4 1 5/8 - 5/8 3/4 7/8, 1 1-1/8, 1-1/4, 1-3/8 1-1/8 - 1-1/2 - 1-1/4 3/4 - 3/4 7/8 1-1/8, 1-1/4 - 1-1/4, 1-3/8 - 1-1/12 - 7/8 - 7/8 1 1-3/8, 1-1/2 1-1/2 - 1-3/4, 2 1-3/4 1-1/2, 2 1 - 1 1-1/4 1-3/4 - 2 - 1-1/4 - 1-1/4 1-1/2 2 - - 1-1/2 - 1-1/2 1-3/4 2-1/4, 2-1/2 - 1-3/4 2 2-3/4 - 2

Previous Page
Next Page