1-800-458-4018 www.appliedmss.com
1
FT 2
Thread ID Kits/Brass SAE 45 Flared Fittings
Advantages
This economical fitting resists mechanical pullout. Can be assembled and dis as sem bled repeatedly. Manufactured from CA 360, CA 345 or CA 377 brass.
Specifications
List ed with Underwriter's Laboratories for flammable liquid, ma rine, refrigeration and gas applications. Meets functional re quire ments of SAE J512 and J513, ASA, ASME and MS (Military Stan dards).
Applications
Use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared. Manufactured especially for hard-to-hold liquids and gases.
Temperature Ranges
From -65 to +250F.
Vibration
Short nut may be used when vibration is minimal. The long nut offers additional vibration capacity.
#102681097 00465 #102681277 00465KP #101745501 00532 #101747855 00533 #101746116 00538 FOUND IN FT 1
AVAILABLE IN AN ASSORTMENT
Thread Identification Kit
Consists of: Digital Dual Vernier Calipers of Plated Steel. Calipers measure inside and outside plus have 1mm and 1.5mm thread pitch gauges cut into the side for identifying all common threads used on metric fittings. Metric Thread Gauge for easy and accurate identification of metric thread pitches from 0.25mm to 6mm. 24 blades BSP Thread Gauge for accurate identification of BSP threads from 11 to 28 threads per inch. 8 blades
PART # LEGACY # DESCRIPTION QTY. 106272161 PA67157 Metric Thread Identification Kit 1
Brass SAE 45 Flared Fittings Thread Measuring Kit
Includes: Thread Pitch Gauge (American & Metric); Caliper; 2 Seat Angle Gauge 37/45-12/30; Carrying Case. Instruction booklet describing thread types and use of the tools are fitted into a convenient case.
PART # LEGACY # DESCRIPTION QTY. 106257336 PA85600 Thread Measuring Kit 1
Assembly Instructions
1. Cut tubing squarely and clean tube end thor ough ly to remove burrs. 2. Place nut onto tube. Place threaded end of nut toward end of tube. 3. Flare tube end with flaring tool to provide 45 flare. 4. Clamp tube flare between nut and nose of fitting body by screwing nut on finger-tight. Tighten with a wrench an additional 1/4 turn for a metal-to-metal seal. Flare fittings are easy to disassemble and may be reassembled repeatedly, for a leak-proof connection.
Nomenclature
Part numbers are constructed from symbols that identify the style and size of the fitting. The first series of numbers and letters iden tifies the style and type fitting. The second series of numbers describes the size. EXAMPLE: 1 49 F -6 -4 Forging (1) Extrusion (2) Flare to External Pipe, 90 Elbow Flare Fitting 3/8" (6/16) Tube O.D. Size 1/4" (4/16) Pipe Size
Sizes
Tube sizes are determined by the number of sixteenths of an inch in the tube O.D.
Previous Page